74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state Rev. 03 - 20 May 2008 Product data sheet General description
The 74AHC373; 74AHCT373 is a high-speed Si-gate CMOS device and is pin compatiblewith Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standardNo. 7-A.
The 74AHC373; 74AHCT373 consists of eight D-type transparent latches featuringseparate D-type inputs for each latch and 3-state true outputs for bus orientedapplications. A latch enable input (LE) and an output enable input (OE) are common to alllatches.
When pin LE is HIGH, data at the Dn inputs enters the latches. In this condition thelatches are transparent, i.e. a latch output will change state each time its correspondingDn input changes. When pin LE is LOW, the latches store the information that is presentat the Dn inputs, after a set-up time preceding the HIGH-to-LOW transition of LE.
When pin OE is LOW, the contents of the 8 latches are available at the outputs. Whenpin OE is HIGH, the outputs go to the high-impedance OFF-state. Operation of the OEinput does not affect the state of the latches.
The 74AHC373; 74AHCT373 is functionally identical to the 74AHC573; 74AHCT573, buthas a different pin arrangement. Features
■ Balanced propagation delays■ All inputs have a Schmitt-trigger action■ Common 3-state output enable input■ Inputs accepts voltages higher than VCC■ Functionally identical to the 74AHC573; 74AHCT573■ Input levels:
◆ For 74AHC373: CMOS input level◆ For 74AHCT373: TTL input level
◆ HBM EIA/JESD22-A114E exceeds 2000 V◆ MM EIA/JESD22-A115-A exceeds 200 V◆ CDM EIA/JESD22-C101C exceeds 1000 V
■ Multiple package options■ Specified from −40 °C to +85 °C and from −40 °C to +125 °C
NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state Ordering information Ordering information Type number Temperature range Description 74AHC373
plastic thin shrink small outline package; 20 leads;
74AHCT373
plastic thin shrink small outline package; 20 leads;
Functional diagram Functional diagram
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state Logic symbol IEC logic symbol Logic diagram Logic diagram (one latch)
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state Pinning information 5.1 Pinning 74AHC373 74AHCT373 Pin configuration SO20 and TSSOP20 5.2 Pin description Pin description Description
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state Pin description …continued Description Functional description Function table Operating mode Internal
Enable and read register (transparent mode)
h = HIGH voltage level one set-up time prior to the HIGH-to-LOW LE transition;
l = LOW voltage level one set-up time prior to the HIGH-to-LOW LE transition;
Limiting values Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Parameter Conditions
The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
For SO20 packages: above 70 °C the value of Ptot derates linearly at 8 mW/K. For TSSOP20 packages: above 60 °C the value of Ptot derates linearly at 5.5 mW/K.
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state Recommended operating conditions Operating conditions Parameter Conditions 74AHC373 74AHCT373 Static characteristics Static characteristics
At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions
−40 °C to +85 °C −40 °C to +125 °C Unit 74AHC373
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state Static characteristics …continued
At recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions
−40 °C to +85 °C −40 °C to +125 °C Unit 74AHCT373
pin; other inputs at VCC orGND; IO = 0 A; VCC = 5.5 V
VI = VCC − 2.1 V; other pins atVCC or GND; IO = 0 A;VCC = 4.5 V to 5.5 V
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state 10. Dynamic characteristics Dynamic characteristics
Voltages are referenced to GND (ground = 0 V); for test circuit see
Symbol Parameter Conditions
−40 °C to +85 °C −40 °C to +125 °C Unit 74AHC373
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state Dynamic characteristics …continued
Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 11. Symbol Parameter Conditions
−40 °C to +85 °C −40 °C to +125 °C Unit Min Typ[1] 74AHCT373; VCC = 4.5 V to 5.5 V
Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V).
CPD is used to determine the dynamic power dissipation (PD in µW). P
fi = input frequency in MHz;fo = output frequency in MHz;CL = output load capacitance in pF;VCC = supply voltage in V;N = number of inputs switching;Σ(C
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state 11. Waveforms
VOL and VOH are typical voltage output levels that occur with the output load. Data input to output propagation delays
VOL and VOH are typical voltage output levels that occur with the output load. Latch enable pulse width and input to output propagation delays
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state
VOL and VOH are typical voltage output levels that occur with the output load. Enable and disable times
VOL and VOH are typical voltage output levels that occur with the output load.
The shaded areas indicate when the input is permitted to change for predicable output performance. Fig 10. Data set-up and hold times Measurement points
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state
RT = termination resistance should be equal to output impedance Zo of the pulse generator.
CL = load capacitance including jig and probe capacitance. Fig 11. Test circuitry for switching times Test data S1 position tPHL, tPLH tPZH, tPHZ tPZL, tPLZ
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state 12. Package outline SO20: plastic small outline package; 20 leads; body width 7.5 mm SOT163-1 DIMENSIONS (inch dimensions are derived from the original mm dimensions)
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
REFERENCES EUROPEAN ISSUE DATE PROJECTION Fig 12. Package outline SOT163-1 (SO20)
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state TSSOP20: plastic thin shrink small outline package; 20 leads; body width 4.4 mm SOT360-1 DIMENSIONS (mm are the original dimensions)
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. REFERENCES EUROPEAN ISSUE DATE PROJECTION Fig 13. Package outline SOT360-1 (TSSOP20)
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state 13. Abbreviations Table 10. Abbreviations Description 14. Revision history Table 11. Revision history Document ID Release date Data sheet status Change notice Supersedes • The format of this data sheet has been redesigned to comply with the new identity guidelines of • Legal texts have been adapted to the new company name where appropriate. • or the input leakage current have been changed.
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state 15. Legal information Data sheet status Document status[1][2] Product status[3] Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
Please consult the most recently issued document before initiating or completing a design.
The term 'short data sheet' is explained in section "Definitions".
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product statusinformation is available on the Internet at URL
Definitions
malfunction of an NXP Semiconductors product can reasonably be expectedto result in personal injury, death or severe property or environmentaldamage. NXP Semiconductors accepts no liability for inclusion and/or use of
Draft - The document is a draft version only. The content is still under
NXP Semiconductors products in such equipment or applications and
internal review and subject to formal approval, which may result in
therefore such inclusion and/or use is at the customer's own risk.
modifications or additions. NXP Semiconductors does not give anyrepresentations or warranties as to the accuracy or completeness of
Applications - Applications that are described herein for any of these
information included herein and shall have no liability for the consequences of
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for thespecified use without further testing or modification. Short data sheet - A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended Limiting values - Stress above one or more limiting values (as defined in
for quick reference only and should not be relied upon to contain detailed and
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
full information. For detailed and full information see the relevant full data
damage to the device. Limiting values are stress ratings only and operation of
sheet, which is available on request via the local NXP Semiconductors sales
the device at these or any other conditions above those given in the
office. In case of any inconsistency or conflict with the short data sheet, the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability. Terms and conditions of sale - NXP Semiconductors products are sold Disclaimers
subject to the general terms and conditions of commercial sale, as publishedat , including those pertaining to warranty,intellectual property rights infringement and limitation of liability, unless
General - Information in this document is believed to be accurate and
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
reliable. However, NXP Semiconductors does not give any representations or
any inconsistency or conflict between information in this document and such
warranties, expressed or implied, as to the accuracy or completeness of such
terms and conditions, the latter will prevail.
information and shall have no liability for the consequences of use of such
No offer to sell or license - Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
Right to make changes - NXP Semiconductors reserves the right to make
grant, conveyance or implication of any license under any copyrights, patents
changes to information published in this document, including without
or other industrial or intellectual property rights.
limitation specifications and product descriptions, at any time and withoutnotice. This document supersedes and replaces all information supplied priorto the publication hereof. Trademarks Suitability for use - NXP Semiconductors products are not designed,
Notice: All referenced brands, product names, service names and trademarks
authorized or warranted to be suitable for use in medical, military, aircraft,
are the property of their respective owners.
space or life support equipment, nor in applications where failure or
16. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: salesaddresses@nxp.com
NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 - 20 May 2008 NXP Semiconductors 74AHC373; 74AHCT373 Octal D-type transparant latch; 3-state 17. Contents
Please be aware that important notices concerning this document and the product(s)described herein, have been included in section 'Legal information'. NXP B.V. 2008. All rights reserved.
For more information, please visit: http://www.nxp.comFor sales office addresses, please send an email to: salesaddresses@nxp.com
Date of release: 20 May 2008 Document identifier: 74AHC_AHCT373_3
BSA TROOP 641 OVER THE COUNTER MEDICATION AUTHORIZATION This form authorizes registered adult leaders of Boy Scout Troop 641 to dispense “over the counter” (non-prescription) medications to scouts under their supervision if in their judgment it is appropriate. Execution of this form is voluntary; however, under BSA policy, adult leaders are prohibited from dispensing medications to scout
Preventive Veterinary Medicine 63 (2004) 237–256A meta-analysis of the milk-production responseafter anthelmintic treatment in naturallyJavier Sanchez , Ian Dohoo , Jeromy Carrier , Luc DesCˆoteaux a Department of Health Management, Atlantic Veterinary College, University of Prince Edward Island, 550 University Avenue, Charlottetown, PEI, Canada C1A 4P3 b Faculté de Médécine Vet