Epoxy_acrylate_winter.xlsx

MATERIAL SAFETY DATA SHEET
Based on Regulation (EC) No. 1907/2006 (REACH) Article 31 Annex II EPOXY ACRYLATE SF RESIN-WINTER GRADE
Identification of the substance / preparation and company/undertaking
Identification of the substance or preparation
Epoxy Acrylate Styrene Free Resin-Winter Grade JFEA410SFW
Use of the substance
Injection resin
Company
JCP Construction Products
Unit 14, Teddington Industrial Estate
Teddington, Middlesex. TW11 9BQ
Tel +44 208 943 1800
Fax +44 208 943 1140
email
Telephone number for emergencies+44 208 943 1800 8.30 a.m. to 5.00 p.m. Monday to Friday Hazards Identification
Classification of the substance or mixture
Classification (1999 /45EEC)
Label elements
Contains
Labelling
Risk phrases:
R10: FlamableR43: May cause sensititation by skin contact Safety phrases:
S24/25: Avoid contact with skin and eyesS36/37/39: Wear suitable protective clothing, gloves and eye/face protection Composition/Information on Ingredients
3.2 Mixtures
923-26-2
213-090-3
25013-15-4
246-562-2
Eye Irrit.2 _ H319STOT SE3 - H335BENZOYL PEROXIDE 202-327-6
The full text for all R-Phrases and Hazard Statements are listed in Section 16 MATERIAL SAFETY DATA SHEET
Based on Regulation (EC) No. 1907/2006 (REACH) Article 31 Annex II EPOXY ACRYLATE SF RESIN-WINTER GRADE
First Aid Measures
Description of first aid measures
Inhalation:
Move the causualty to fresh air at once. Get medical attention if any discomfort continues Ingestion:
NEVER MAKE AN UNCONCIOUS PERSON VOMIT OT DRINK FLUIDS. Wash out mouth with water. Do notinduce vomiting. Get medical attention if any discomfort continues Skin contact:
Remove casualty from source of contamination. Remove contaminated clothing. Wash immediately withplenty of soap and water. Seek medical advice if discomfort occurs Eye contact:
Immeadiately flush with running water for 15 minutes. Remove any contact lenses and open eyelids widely.
If irritation persists seek medical advice and show this safety data sheet Most important symptons and effects, both acute and delayed
Inhalation:
Irritation of the nose, throat and airway.
Ingestion:
Skin contact:
Eye contact:
Indication of any immediate medical attention and special treatment needed
Immediate/special treatment:
No recommendations given, but first aid may still be required in case of accidental exposure,inhalation or ingestion of this chemical. If in doubt seek medical advice Fire fighting measures
Extinguishing Media
Exposure hazards
Flamable. In case of fire, toxic gases (CO, CO2, Nox) may be produced.
Advice for fire-fighters
Wear self-contained breathing apparatus. Wear protective clothing to prevent contact withskin and eyes Accidental release measures
Personal precautions
Refer to section 8 of SDS for personal protection details.
Environmental precautions
Do not discharge into drains, rivers or onto the ground. Clean Up procedure
Transfer to a closable, labelled salvage container for disposal according to local regulations.
Reference to other sections
Refer to section 8 of SDS. Refer to section 13 of SDS.
Handling and storage
Handling requirements
Ensure there is sufficient ventilation in the area. Do not use in a confined space. Storage conditions
Store in cool, well ventilated area. Keep container tightly closed. Keep away from sources of ignition. Keep away from oxidisers, heat and flames.
Suitable packaging
Specific end use(s)
MATERIAL SAFETY DATA SHEET
Based on Regulation (EC) No. 1907/2006 (REACH) Article 31 Annex II EPOXY ACRYLATE SF RESIN-WINTER GRADE
Exposure controls/personal protection
Control parameters
TWA-8 Hrs
Exposure controls
Engineering measures
Provide adequate ventilation. Observe Occupational Exposure Limits. Avoid inhaling vapours Respiratory equipment
No special requirement but may be required where excessive air contamination exists.
Hand protection
Eye protection
Skin protection
Environmental
Hygene measures
DO NOT SMOKE IN WORK AREA. Wash hands at the end of each shift and before eating,smoking and using the toilet. Wash promptly if skin becomes contaminated. Promptly remove any clothing that becomes contaminated. Use approriate skin cream to prevent drying of skin. When using, do not eat, drink or smoke.
Physical/Chemical properties
InitialBoiling point/rangeºC
Melting point rangeºC
Relative density
Vapour density
Vapour pressure
Evaporation rate
Flammability limits % lower
pH-Value Conc. Solution
Viscocity
Solubility Value (G/100G H2O@20°C)
Decomposition temperature(°C)
Odour threashold, Lower
Odour threashold, Upper
Flash point(°C)
Flammability limit-Lower (%)
Flammability limit-Upper (%)
Partition coefficient (N-Octanol/Water)
Explosive properties
oxidising properties
Other information
10. Stability and reactivity
10.1 Reactivity
Reacts with: Organic peroxides/hydroperoxides 10.2 Chemical stability:
Stable under normal temperature conditions 10.3 Hazardous reactions:
Hazardous reactions will not occur under normal transport or storage conditions 10.4 Conditions to avoid:
Avoid excessive heat for long periods of time 10.5 Incompatable materials
Materials to avoid: peroxides/hydroperoxides 10.6 Haz. Decomp products:
In case of fire, toxic gases (CO, CO2, Nox) may be formed MATERIAL SAFETY DATA SHEET
EPOXY ACRYLATE SF RESIN-WINTER GRADE
11. Toxicological information
11.1 Information on toxicological effects
Inhalation
In high quantities, vapours may irritate throat and respiratory system, causing coughing Ingestion
Skin contact
Eye contact
Health warning
Irritating to skin. Irritating to eyes. May cause sensititation by skin contact Medical considerations
Toxicological information on ingredients
2-HYDROXYPROPYL METHACRYLATE (CAS:923-26-2) Acute toxicity (Oral LD50)
BENZOYL PEROXIDE (CAS:94-36-0)ETHENYLMETHYLBENZENE (CAS:25013-15-4) Acute toxicity (Oral LD50)
Acute toxicity (Inhalation LC50)
12. Ecological information
Ecotixicity
Not regarded as dangerous to the environment 12.1 Toxicity
Ecological information on ingredients
Acute toxicity-Fish
LC50 96 hours 0.06 mg/l Onchorhynchus mykiss (Rainbow trout) Acute toxicity-Aquatic invertebrates
Acute toxicity-Aquaticplants
EC50 72 hours 0.071 mg/l Selenastrum capricomutum Acute toxicity-Fish
LC50 96 hours 23.4 mg/l Pimephales promelas (Fat-head Minnow) 12.2 Persistence and degradeability
12.3 Bioaccumulative potential
Bioaccumulative potential
Partition coefficient
Ecological information on ingredients
Partition coefficient
12.4 Mobility in soil
Not relevant, due to the form of the product Result of PBT and vPvB assesment
This substance does not contain any PBT or vPvB substances Other adverse effects
13. Disposal considerations
13.1 Waste treatment methods
Residue and empty containers should be taken care of as hazardous waste accordig to localand national provisions MATERIAL SAFETY DATA SHEET
EPOXY ACRYLATE SF RESIN-WINTER GRADE
14. Transport information
14.1 UN Number
UN No. (ICAO)
14.2 UN proper shipping name
14.3 Transport hazard class(es)
ADR/RID/AND Class
IMDG Class
ICAO Class/Division
Transport labels
14.4 Packing group
ICAO Packing group
14.5 Environmental hazards
Environmentally Hazardous Substance/Material/Marine Pollutant
14.6 Special precautions for user
14.7 Transport in bulk according to Annex ll of MARPOL73/78 and the IBC Code
15. Regulatory information
15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Guidance notes
Workplace exposure limits EH40
EU Legislation
Regulation (EC) No 1272/2008 of the European Parliament and the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No. 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Regulation, Authorisation and Restriction of Chemicals (REACH), establishing a European ChemicalsAgency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directive 91/155/EEC, 93/67/EEC, 93/105/EC, and 200/21/EC, including amendments.
15.2 Chemical safety assessment
A chemical safety assessment has not been carried out for the substance or the mixture by the supplier 16. Other information
Risk Phrases in Full
R3
Extreme risk of explosion by shock, friction, fire or other sources of ignition Hazards statements in full
H226
MATERIAL SAFETY DATA SHEET
EPOXY ACRYLATE SF RESIN-WINTER GRADE
Disclaimer
This information relates only to the specific material designated and may not be valid for such material used in combination with anyother material or in any process. Such information is, to the best of the coampany's knowledge and believe, accurate and reliable as of the date indicated. However, no warranty, guarantee or representation is made to its accuracy, reliability or completeness. It is the user's responsibility to satisfy himself as to the suitability of such information for his own particular use.

Source: http://www.jcpfixings.co.uk/media/pdfs/COSHH/Epoxy_Acrylate_Winter.pdf