Lmx grease

LMX GREASE
Lithium complex grease
DESCRIPTION
LMX Grease is a lithium-complex thickened mineral oil based grease of NLGI No.2 consistency having extreme pressure properties andinhibited against oxidation and corrosion.
APPLICATIONS
Lithium complex greases have similar basic properties to conventional Such performance characteristics mean that lithium complex greases lithium soap greases but have the advantages of higher drop such as LMX Grease have a longer life at higher temperatures than point, less oil separation particularly at high temperature and more normal lithium soap greases. The water resistance and low stable consistency near the drop point of the grease. The drop temperature pumpability of lithium complex greases is also better point of these greases is typically 260 °C. This mean that the than normal lithium soap greases. For these reasons, lithium maximum operating temperature is greatly increased over that of complex grease find wide acceptance as a high temperature grease standard lithium soap greases and in many applications is limited for applications in the Marine and Offshore Industries where severe only by what the base oil of the grease will stand.
operating conditions necessitate an improvement over standardlithium greases.
FEATURES/BENEFITS
LMX grease offers an impressive number of desirable features that • Increased load-carrying capacity over wider working temperature confer clear operational advantages and offer the customer distinct key benefits. The overall result is excellent cost effectiveness.
• Improved working temperature range and thermal stability • Better water-resistance and adhesion to metal surfaces • Reduced oil separation and resistance to hardening and pressure • Additional multi-purpose properties enabling easier grade CARE AND HANDLING
PACKAGING AND STORAGE
All packages should be stored under cover. Where outside storage Products should not be stored above 60°C, exposed to hot sun or is unavoidable drums should be laid horizontally to avoid the possible ingress of water and the obliteration of drum markings.
TECHNICAL DATA
Extreme pressure, Corrosion & Oxidation Inhibitors The above figures are typical of those obtained with normal production tolerance and do not constitute a specification GENERAL ADVICE
Further information on all Castrol Marine lubricants is available from any Castrol Marine office or from: Technology Centre Whitchurch Hill Pangbourne Reading RG8 7QR United Kingdom This data sheet and the information it contains is believed to be accurate as of the date of printing. However, no warranty or representation, express or implied, is made as toits accuracy or completeness. Data provided is based on standard tests under laboratory conditions and is given as a guide only. Users are advised to ensure that they refer tothe latest version of this data sheet.
It is the responsibility of the user to evaluate and use products safely, to assess suitability for the intended application and to comply with all applicable laws and regulations.
Material Safety Data Sheets are available for all our products and should be consulted for appropriate information regarding storage, safe handling, and disposal of the product.
No responsibility is taken by either BP plc or its subsidiaries for any damage or injury resulting from abnormal use of the material, from any failure to adhere to recommendations,or from hazards inherent in the nature of the material.
All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you require any further information.
Castrol and the Castrol logo are the trade marks of Castrol Limited, used under licence.
2009 BP Marine Limited. All rights reserved.
Registered office: Chertsey Road, Sunbury-on-Thames, Registered in England & Wales, no 01214291.

Source: http://www.easyparts.be/documentation/2570.pdf